Rogowski coil MFC190

from 116,30€

Rogowski coil MFC190 (cross section 12mm) is a flexible current transducer based on Rogowski principle. MFC190 coils are available in different sizes and can be supplied according to customer’s design, therefore they can be used in all those applications, in which traditional transducers are not fitting due to its size and/or weight. Flexible Rogowski coil is an extremely confortable solution for current measurement and can be used in a number of cases where traditional current transducer is not the adequate solution.
MFC190 coil is provided with a shield against the influence of external magnetic fields, therefore it grants a stable measurement from low currents to hundreds of kA. The Rogowski coils must be connected to an electronic integrator for 90° phase shift compensation and frequency equalization.
Accuracy class 0,5% (IEC 61869-10)



Catalogue
Datasheet
User manual
Video

CONFIGURATIONS AVAILABLE IN THE E-COMMERCE REQUEST MORE INFORMATION

SKU: N/A Category: Tag:

NAMEDESCRIPTIONStockPRICEQUANTITYAdd to cart
Rogowski coil MFC190 - MFC190 3301.0001.0001MFC190 30cm length Ø ~6cm calibrated 3m cableAvailability to be confirmed116,30€ VAT excluded Availability to be confirmed.
Contact us for more information
Rogowski coil MFC190 - MFC190 3301.0002.0001MFC190 35cm length Ø ~7cm calibrated 3m cableAvailability to be confirmed120,30€ VAT excluded Availability to be confirmed.
Contact us for more information
Rogowski coil MFC190 - MFC190 3301.0004.0001MFC190 60cm length Ø ~17cm calibrated 3m cableAvailability to be confirmed126,20€ VAT excluded Availability to be confirmed.
Contact us for more information

Description

DO YOU NEED ADDITIONAL CONFIGURATIONS?

For other configurations contact the sales representative

REQUEST MORE INFORMATION

TECHNICAL SPECIFICATIONS

Transducer
Coil length: from 30 to 300 cm
Coil diameter: 12.4 ±0.2 mm
Fastening: bayonet holder
Material: thermoplastic UL94-V0

Electrical charateristics
Nominal output rate: 333 mV / kA @ 50 Hz (RMS values)
Max measurable current: 65 kA
Coil resistance: 300 … 2000 Ω
Accuracy: Class 0,5-A1 according to IEC 61869-10
Frequency: 50/60 Hz
Overvoltage category: 1000 V CAT III, 600 V CAT IV
Pollution degree: 2
Insulation test voltage: 7400 VRMS / 5 s

Connection cable
Type: 3 x 22 AWG shielded
Length: 3 m. Other lengths on request: 5, 7, 10, 15 m

Enviromental conditions
Operating temperature: from -30°C to +80°C
Storage temperature: from -40°C to +80°C
Protection degree: IP67 or IP68 according to the model (not evaluated by UL)

Standard compliance
IEC, UL standards: UL 61010-1 Ed3, UL 61010-2-032, CAN/CSA-C22.2 No. 61010-1, IEC 60529, IEC 61869-10

Certification

Related products