Products » PQ Meters Class A » PQM4000RGW

  • Additional voltage and current measurement channels in comparison with other standard three-phase devices.
  • Rogowski coils included to grant a quick installation as well as an accurate current measurement.
  • Continuous monitoring of the power quality and Class A certified measurements for voltage characteristics.
  • Simultaneous recording of events, Min/Avg/Max LOG and energy counters.
  • Several possibilities for instrument data transmission: Ethernet, WIFI, Modbus RTU/TCP, USB.
  • User-friendly instrument web interface with multilingual pages.

  • Switchboards, gensets, motor control centers, etc.
  • Power monitoring & control systems
  • Individual machine load monitoring
  • Power demand analysis and management
  • Harmonic monitoring
  • Remote metering and cost allocation
  • Motor inrush current studies

Related products

MFC150 MFC150
Moduli di comunicazione
PQMGPS1 external GPS module
Moduli di comunicazione
PQM-Tool Class A monitoring software tool
Moduli di comunicazione
PQM-Analyzer for data analysis according EN 50160
Specifications for IEC/EN 61000-4-30 compliance

Frequency (5.1)
Uncertainty ±10 mHz
Measuring range 42.5 Hz - 57.5 Hz, 51Hz - 69 Hz

Magnitude of supply voltage (5.2)
Uncertainty ±0.1% of Udin
Measuring range 10% - 150% of Udin

Flicker (5.3)
Uncertainty ±5% of reading
Measuring range 0.2 - 10 Pst

Supply voltage dips and swells (5.4)
Uncertainty Magnitude: ±0.2% of Udin
Duration: ±1 cycle

Voltage interruptions (5.5)
Uncertainty Duration: ±1 cycle

Unbalance (5.7)
Uncertainty ±0.15%
Measuring range 0.5% - 5% u2 0.5% - 5% u0

Harmonics (5.8)
Uncertainty IEC/EN 61000-4-7 Class I
Measuring range 10% - 200% Class 3 of IEC/EN 61000-2-4


Interharmonics (5.9)
Uncertainty IEC/EN 61000-4-7 Class I
Measuring range 10% - 200% Class 3 of IEC/EN 61000-2-4

Mains signalling (5.10)
Uncertainty ±5% of reading with measuring range 3%-15% of Udin
±0.15% of reading with measuring range 1%-3% of Udin
Measuring range 0% - 15% of Udin

Harmonics (5.5)
Uncertainty Magnitude: ±0.2% of Udin


Harmonics (5.8)
Uncertainty Consistent with "Magnitude of supply voltage (5.2)"
Measuring range 10% - 150% of Udin

Power supply
Auxiliary power voltage: 85...285 VAC 50/60 Hz / 65...250 VDC
Auxiliary power consumption: 15 VA max
Fuse: 250 VAC / 500 mA T type delayed
Backup battery: Li-Ion, 2500 mAh (>15 min autonomy)

Measurement inputs
Three-phase voltage inputs for direct connection / PT: P-N: max 580 V RMS CAT III, L-L: max 1000 V RMS CAT III
U4 voltage input for direct connection: max 580 V RMS CAT III
Voltage input crest factor: 2
Voltage input impedance: >2 MΩ/phase
Current full scale: selectable 500A, 3kA 20kA RMS; for I5 50A, 500A
Current input crest factor: 3
Frequency range: 42.5...57.5 Hz / 51...69 Hz
Frequency reference channel: Phase 1/Line 12 voltage
Sampling: Simultaneous, 51.2 kHz @50 Hz

Three-phase voltage: ±0.1% Un over 10 ... 150% Un range
U4 voltage: ±0.2% measurement
Currents: ±0.2% measurement (device)
Powers: ±0.2% measurement
Frequency: ±8 mHz
Harmonics: Class 1 (IEC/EN 61000-4-7)
Realtime clock (RTC): <1s in 24h without synchronisation; <5ms with GPS synchronisation
Active energy: Class 0.5S, compliant to IEC/EN 62053-22
Reactive energy: Class 1, compliant to IEC/EN 62053-23

I/O channels
Digital inputs: 4 optoisolated, 24 VDC ±20%
Digital outputs: 4 passive optoisolated (PhotoMOS), 24 VDC-50 mA
Analog outputs: 4 optoisolated, 4 ... 20 mADC, max load 500 Ω
Digital input delay time: max 10 ms
Digital input consumption: max 7 mADC
Digital output delay time: In alarm mode, max. 200 ms
Digital output pulse time: In pulse mode, 50 ms±2
Analog output reaction time: max 200 ms

System memory: 128 MB Flash, 256 MB RAM
Recording memory: 16 GB

Ethernet ports: 2 Auto MDIX RJ45 10/100 Base Ethernet
RS485 port (slave): Optoisolated, 0.5UL, 2400"¦115200bps
WIFI antenna: Passive antenna, SMA connector on rear panel
GPS antenna: Active patch antenna, remote powered, SMA connector
Protocols: HTTP, HTTPS, FTP, SFTP, NTP, NMEA, Modbus TCP, Modbus RTU
USB port: USB 2.0 A type socket, high speed 480 Mbit/s

RTC Synchronisation
Synchronisation system: NTP and/or GPS

Environmental conditions

Installation and use code: PQI-A-FI1
Operating temperature (limit range): FI1, 3K6 -25 ... +55 °C
Storage temperature: -25 ... +75 °C
Relative humidity: 95% max without condensing
Altitude: max 2000 m AMSL

Mechanical characteristics
Mounting: Panel mount 192x144 DIN size
Size: Front (LxH): 191x143 mm, Rear (LxHxD): 183x135x190 mm
Weight: 1400 g

Safety standards
Product compliance: IEC/EN 62586-1, IEC/EN 62586-2
Certification: Class A, IEC/EN 61000-4-30:2015 Ed.3 for voltage
Safety: CAT III power supply, insulation class 2, 600 V
Directive: 2006/95/EC LV, EN 61010
EMC: 2004/108/EC EMC, EN 50081-2, EN 50082-2, EN 61326/A1,
EN 55011:1998+A1:1999+A2:2002,
EN 61000-6-2/-4-2/-4-3/-4-4/-4-5/-4-6/-4-11


and review




Register or, if you already
have credentials, please
login and enter directly.


Client Protected Area

Register for access
or login if you already have
the credentials.


YouTube Channel

YouTube Channel